– This converter converts 1000BASE-T twisted-pair signals to 1000BASE-SX/LX multi-mode/single-mode fiber signals. Maximum fiber cable distance is 550 m for 1000BASE-SX and 20 km for 1000BASE-LX. 1 RJ-45 twisted-pair port and 1 SFP port (mini GBIC) are provided.
100Base-TX to 100Base-FX (SC) Single-mode Media Converter D-Link DMC-F15SC/E
D-Link’s Standalone Media Converters turn an Ethernet connection into fiber, allowing for ultra-fast long distance connections. Installation of a Standalone Media Converter is simple, and allows you to tap into fiber speeds with ease. Instead of requiring an investment in an entire chassis, the standalone series is able to provide the same high-quality conversion on a unit-by-unit basis. The standalone nature of these means that you can use save space and cut costs while still extending your network over long distances up to 60 km on a fiber-optic line. In addition to all models supporting 10/100 Mbps Half/Full-duplex, the DMC-G01LC also allows for 1000 Mbps Full-Duplexing, letting you truly maximize your network’s potential.
Media converter D-Link DMC-1910R-E
– 1000Base-TX to 1000Base-LX Single Fiber Media converter (TX: 1310μm; RX: 1550μm, Single-mode, 15km).
– Up to 15 km Single-Mode Fiber Cable Distance.
– Single Fiber Strand for Transmission/Reception.
– Full Duplex operation.
– 802.3x Flow Control Support.
– Manageable Through Intelligent Chassis System.
– LLR (Enable/Disable), Fiber (Auto-Negotiation/Manual) Functions.
– Installable as Stand-Alone Device or in Rack-Mount Chassis.
Gigabit Single-mode SFP Media Converter TP-LINK MC220L
The MC220L is a media converter designed to convert 1000BASE-SX/LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX/LX/LH standards, the MC220L is designed for use with multi-mode/single-mode fiber cable utilizing the LC-Type connector. It works at 850nm on both transmitting and receiving data when adopting multi-mode fiber and 1310nm on both transmitting and receiving data when adopting single-mode.
Media converter D-Link DMC-1910R-A9A
-1000Base-TX to 1000Base-LX Single Fiber Media converter (Tx: 1310μm; Rx: 1550μm, Single-mode, 15km).
-The D-Link DMC-1910R Fiber Media Converter converts 1000BASE-T copper Gigabit signals to 1000BASE-LX fiber Gigabit signals.
-This allows you to connect longer distance fiber cables between two devices that are designed only for shorter distance Cat. 5 twisted pair cable.
-The DMC-1910R converts 10/100Mbps 10BASE-T-100BASE-TX Fast Ethernet twisted pair signals to 100BASE-FX single-mode signals up to 15 km apart.
-This media converter supports maximum 15 km fiber cable distance.