Media converter D-Link DMC-1910T-E

Mã: DMC-1910T-E

Media converter D-Link DMC-1910T-E 1000Base-TX to 1000Base-LX Single Fiber

– 1000Base-TX to 1000Base-LX Single Fiber Media converter (TX: 1550μm; RX: 1310μm, Single-mode, 15km).
– The D-Link DMC-1910T/E Fiber Media Converter converts 1000BASE-T copper Gigabit signals to 1000BASE-LX fiber Gigabit signals. This allows you to connect longer distance fiber cables between two devices that are designed only for shorter distance Cat. 5 twisted-pair cable.
– The DMC-1910T/E media converter combines transmitting and receiving signals onto one fiber strand using two wavelengths. This design avoids the budget losses incurred by the single-wavelength single-fiber technology, and minimizes any possibility of reflections in the system. The DMC-1910 consists of two units. One unit uses one wavelength to transmit and a second wavelength to receive, while the other flips that relationship. Two different types of transmitting wavelength are supported: one bi-directional wavelength for both transmission and reception.

DMC-1910T-E

Model	DMC-1910T/E
Standards	802.3ab 1000BASE-T 802.3z 1000BASE-LX
Conversion Scheme	Pair of one-channel single-mode fiber media conversion between 1000BASE-T and 1000BASE-LX
Wavelength	2 different types of transmitting wavelength 1 wavelength with WDM bi-directional for both transmit and receive TX: 1550 micron; RX: 1310 micron
Connectors	1000BASE-T: RJ-45 connector 1000BASE-LX: LC connector
Cables	1000BASE-T: Cat. 5 twisted-pair cable (up to 100m) 1000BASE-LX: single-mode fiber cable (up to 15km)
Full Duplex	Full-duplex mode support on 1000BASE-T Gigabit port
Auto MDI/MDIX	Auto MDI/MDIX on 1000BASE-T port
Transmission Method	Store-and-forward mechanism
Forwarding Rate	Full wire-speed forwarding rate
Installation Methods	Stand-alone device Installable module in DMC-1000 chassis
Power Supply	Through AC power adapters (when used as stand-alone device)
Power Consumption	≤5.5W
Operating Temperature	0° – 40°C
Storage Temperature	-25° – 70° C
Humidity	10 ~ 90% non-condensing

Sản phẩm tương tự

DMC-F20SC-BXU/E

100Base-TX to 100Base-FX (LC) Single-mode Media Converter D-Link DMC-F20SC-BXU/E

D-Link’s Standalone Media Converters turn an Ethernet connection into fiber, allowing for ultra-fast long distance connections. Installation of a Standalone Media Converter is simple, and allows you to tap into fiber speeds with ease. Instead of requiring an investment in an entire chassis, the standalone series is able to provide the same high-quality conversion on a unit-by-unit basis. The standalone nature of these means that you can use save space and cut costs while still extending your network over long distances up to 60 km on a fiber-optic line. In addition to all models supporting 10/100 Mbps Half/Full-duplex, the DMC-G01LC also allows for 1000 Mbps Full-Duplexing, letting you truly maximize your network’s potential.

Mã: DMC-F20SC-BXU/E Danh mục: Bộ chuyển đổi quang, Thiết bị quang - Cáp quang Từ khóa: DMC-F20SC-BXU/E

DMC-F60SC-E

Media Converter D-Link DMC-F60SC-E

– 100Base-TX to 100Base-FX Media Converter (Single mode 1310nm) – 60km.
– Fiber-optic speeds are critical to success, but twisted-pair cabling can only go so far. Using D-Link’s converters you can change a twisted-pair Fast Ethernet connection into a single-mode or multi-mode fiber connection that can go much farther. Converters for distances of anywhere from 2 km to 60 km allow you to optimize your selection.

Mã: DMC-F60SC-E Danh mục: Bộ chuyển đổi quang, Thiết bị quang - Cáp quang Từ khóa: DMC-F60SC-E

DMC-515SC-E

Media Converter D-Link DMC-515SC-E

– 10/100Base-TX (UTP) to 100Base-FX (SC) Single-mode 15km Fiber Media Converter (Usable in DMC-1000 Chassis).
– The DMC-515SC convert 10/100Mbps 10BASE-T/100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet single-mode fiber signals.
– 1 RJ-45 twisted-pair port and 1 fiber port (SC connector) are provided.
– Supporting maximum 15 km fiber cable distance.

Mã: DMC-515SC-E Danh mục: Bộ chuyển đổi quang, Thiết bị quang - Cáp quang Từ khóa: DMC-515SC-E

DMC-920R

Media converter D-Link DMC-920R

– A pair of one-channel single fiber is used for media conversion between 10/100BASE-TX and 100BASE-FX.
– Two different transmitting wavelengths, one wavelength with bi-directional for both transmit and receive.
– This media converter provides 1310 micron for TX, 1550 micron for RX.
– Fiber cable support is 9/125um, 10/125um single-mode fiber, maximum 20 km cable distance.

Mã: DMC-920R Danh mục: Bộ chuyển đổi quang, Thiết bị quang - Cáp quang Từ khóa: DMC-920R