– 10/100Base-TX (UTP) to 100Base-FX (SC) Single-mode 15km Fiber Media Converter (Usable in DMC-1000 Chassis).
– The DMC-515SC convert 10/100Mbps 10BASE-T/100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet single-mode fiber signals.
– 1 RJ-45 twisted-pair port and 1 fiber port (SC connector) are provided.
– Supporting maximum 15 km fiber cable distance.
Media converter D-Link DMC-920T
– A pair of one-channel single fiber is used for media conversion between 10/100BASE-TX and 100BASE-FX.
– Two different transmitting wavelengths, one wavelength with bi-directional for both transmit and receive.
– This media converter provides 1550 micron for TX, 1310 micron for RX.
– Fiber cable support is 9/125um, 10/125um single-mode fiber, maximum 20 km cable distance.
Media converter D-Link DMC-1910T-E
– 1000Base-TX to 1000Base-LX Single Fiber Media converter (TX: 1550μm; RX: 1310μm, Single-mode, 15km).
– The D-Link DMC-1910T/E Fiber Media Converter converts 1000BASE-T copper Gigabit signals to 1000BASE-LX fiber Gigabit signals. This allows you to connect longer distance fiber cables between two devices that are designed only for shorter distance Cat. 5 twisted-pair cable.
Media Converter D-Link DMC-700SC-E
The DMC-700SC by D-Link® is a media converter designed to connect 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Based on the IEEE 802.3ab and 802.3z standards, the DMC-700SC is designed for use with multi-mode fiber cable utilising the SC-Type connector. The DMC-700SC supports shortwave (SX) laser specifications at a full wire-speed forwarding rate. Other features of this module include the ability to be used as a standalone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The DMC-700SC will transmit at extended fiber optic distances utilising multimode fiber up to 550 meters.
Media Converter D-Link DMC-530SC-E
– 10/100Base-TX (UTP) to 100Base-FX (SC) Single-mode 30km Fiber Media Converter (Usable in DMC-1000 Chassis).
– The DMC-530SC convert 10/100Mbps 10BASE-T/100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet single-mode fiber signals.