Media Converter D-Link DMC-530SC-E
– 10/100Base-TX (UTP) to 100Base-FX (SC) Single-mode 30km Fiber Media Converter (Usable in DMC-1000 Chassis).
– The DMC-530SC convert 10/100Mbps 10BASE-T/100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet single-mode fiber signals.
Media Converter D-Link DMC-700SC-E
The DMC-700SC by D-Link® is a media converter designed to connect 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Based on the IEEE 802.3ab and 802.3z standards, the DMC-700SC is designed for use with multi-mode fiber cable utilising the SC-Type connector. The DMC-700SC supports shortwave (SX) laser specifications at a full wire-speed forwarding rate. Other features of this module include the ability to be used as a standalone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The DMC-700SC will transmit at extended fiber optic distances utilising multimode fiber up to 550 meters.
Media Converter D-Link DMC-810SC-E
– 1000Base-TX (UTP) to 1000Base-LX (SC) Single-mode 10km Fiber Media Converter (Usable in DMC-1000 Chassis).
– This Media Converter can be used by itself or installed in a chassis and converts between 1000BASE-T Gigabit twisted-pair signals to 1000BASE-LX Gigabit single-mode fiber signals.
– The DMC-810SC converts 1000BASE-T Gigabit twisted-pair signals to 1000BASE-LX Gigabit single-mode fiber signals. Maximum fiber cable distance is 10 km. 1 RJ-45 port and 1 fiber port (SC type connector) are provided.
Media converter D-Link DMC-920R
– A pair of one-channel single fiber is used for media conversion between 10/100BASE-TX and 100BASE-FX.
– Two different transmitting wavelengths, one wavelength with bi-directional for both transmit and receive.
– This media converter provides 1310 micron for TX, 1550 micron for RX.
– Fiber cable support is 9/125um, 10/125um single-mode fiber, maximum 20 km cable distance.
Media converter D-Link DMC-920T
– A pair of one-channel single fiber is used for media conversion between 10/100BASE-TX and 100BASE-FX.
– Two different transmitting wavelengths, one wavelength with bi-directional for both transmit and receive.
– This media converter provides 1550 micron for TX, 1310 micron for RX.
– Fiber cable support is 9/125um, 10/125um single-mode fiber, maximum 20 km cable distance.
Media Converter D-Link DMC-F30SC-E 100Base-TX to 100Base-FX (SC) Single-mode
– 100Base-TX to 100Base-FX (SC) Single-mode Media Converter (30km) (Stand-Alone).
– Fiber-optic speeds are critical to success, but twisted-pair cabling can only go so far. Using D-Link’s converters you can change a twisted-pair Fast Ethernet connection into a single-mode or multi-mode fiber connection that can go much farther.
Media Converter D-Link DMC-F60SC-E
– 100Base-TX to 100Base-FX Media Converter (Single mode 1310nm) – 60km.
– Fiber-optic speeds are critical to success, but twisted-pair cabling can only go so far. Using D-Link’s converters you can change a twisted-pair Fast Ethernet connection into a single-mode or multi-mode fiber connection that can go much farther. Converters for distances of anywhere from 2 km to 60 km allow you to optimize your selection.
Media Converter D-Link DMC-G01LC-E 10/100/1000Mbps to SFP
D-Link’s DMC-G01LC standalone media Converter turns a copper Ethernet link into a fiber link, allowing for an ultra-fast, long distance connection. Installation of a standalone media converter is simple, and allows you to tap into fiber speeds with ease. Instead of requiring an investment in an entire chassis, a standalone media converter provides the same high-quality conversion on a unit-by-unit basis. You can save space and cut costs while still extending your network over long distances of 10 km and beyond on a fiber optic line.
Media Converter PLANET ICS-100 RS-232/ RS-422/ RS-485 over Fast Ethernet
Thiết bị chuyển đổi PLANET ICS-100 cho phép chuyển đổi giao tiếp RS-232/ RS-422/ RS-485 qua mạng Internet tốc độ cao. Thiết bị bao gồm kết nối RJ-45, kết nối SC và single-mode/ multi-mode cho sự chuyển đổi cần thiết của bạn. Tín hiệu Ethernet cho phép hai phân đoạn mạng kết nối với nhau dễ dàng, hiệu quả, chi phí hợp lý. Bộ chuyển đổi này có thể sử dụng như một thiết bị độc lập hoặc có thể coi là một module cho chuyển đổi truyền thông PLANET (MC-700, MC-1000 và MC-1500). Nhằm tiết kiệm thời gian, chi phí cho người dùng và các hệ thống tích hợp (System Intergrated), mà không cần thay thế thiết bị chuyển đổi song song và phần mềm hệ thống.
Media Converter TP-LINK MC110CS 10/100Mbps Single-mode
– Tương thích với các chuẩn 802.3u 10/100Base-TX, 100Base-FX
– Tính năng Link Fault Passthrough và Far End Fault giảm thiểu sự mất mát gây ra bởi các liên kết lỗi rất kịp thời
– Cung cấp cấu hình chuyển mạch của chế độ truyền bán song công / song công cho cổng FX
– Mở rộng khoảng cách cáp quang lên tới 20km
– Tự động điều chỉnh tốc độ 10/100Mbps và tự động MDI / MDIX cho cổng TX
– Cung cấp cấu hình chuyển mạch của chế độ truyền Bán song công / Song công cho cổng FX
– Tính năng Link Fault Passthrough và Far End Fault giảm thiểu sự mất mát gây ra bởi những liên kết lỗi rất kịp thời
– Mở rộng khoảng cách cáp quang lên tới 20km
– Dễ dàng xem và giám sát hoạt động của mạng qua chỉ dẫn trên đèn LED
– Cung cấp điện ở bên ngoài
Media Converter TP-LINK MC111CS 10/100Mbps Single-mode WDM
The MC111CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC111CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC111CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC111CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1550nm on transferring data and at 1310nm on receiving data. So the other end device to cooperate with the MC111CS should work at 1310nm on transferring data and at 1550nm on receiving data. Another TP-LINK´s media converter MC112CS is just one of the examples to cooperate with MC111CS.
Media Converter TP-LINK MC112CS 10/100Mbps Single-mode WDM
The MC112CS is a media converter designed to convert 100BASE-FX fiber to 100Base-TX copper media or vice versa. Adopting WDM technology, MC112CS takes only one fiber cable to transmit and receive data, which will save half cabling cost for you. Designed under IEEE 802.3u 10/100Base-TX and 100Base-FX standards, the MC112CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC112CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on transferring data and at 1550nm on receiving data.
Media Converter TP-LINK MC200CM Gigabit Multi-mode
The MC200CM is a media converter designed to convert 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-SX standards, the MC200CM is designed for use with multi-mode fiber cable utilizing the SC-Type connector. The MC200CM supports shortwave (SX) laser specification at a full wire speed forwarding rate. It works at 850nm on both transmitting and receiving data.
Media Converter TP-LINK MC210CS Gigabit Single-mode
The MC210CS is a media converter designed to convert 1000BASE-LX/LH fiber to 1000Base-T copper media or vice versa. Designed under IEEE802.3ab 1000Base-T and IEEE802.3z 1000Base-LX/LH standards, the MC210CS is designed for use with single-mode fiber cable utilizing the SC-Type connector. The MC210CS supports longwave (LX) laser specification at a full wire speed forwarding rate. It works at 1310nm on both transmitting and receiving data.
Media Converters D-Link DMC-1000-E
– This 16-slot chassis can hold up to 16 media converters. The chassis provides 19-inch standard rack-mount housing for the media converters, the power necessary for the media converters, plus optional redundant power supplies and SNMP/web-based network management.
SNMP Management Module for DMC-1000 D-Link DMC-1002
This module provides web-based and SNMP-based management of all media converters and power supply modules installed in the DMC-1000 chassis. It has a 32bits, RISC microprocessor running high performance real-time operating system. It provides a 10 / 100Mbps Ethernet port for network connection, allowing you to configure and control the system through an SNMP management station or a PC with a web browser. An RS-232 port is also provided to connect to a console (PC) to set the configuration.
Hiển thị 17–32 của 32 kết quả