DMC-300SC converts 10/100Mbps 10BASE-T/100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet multi-mode fiber signals. Maximum fiber cable distance is 2 km. 1 RJ-45 twisted-pair port and 1 fiber port are provided.
Media converter D-Link DMC-1910R-E
– 1000Base-TX to 1000Base-LX Single Fiber Media converter (TX: 1310μm; RX: 1550μm, Single-mode, 15km).
– Up to 15 km Single-Mode Fiber Cable Distance.
– Single Fiber Strand for Transmission/Reception.
– Full Duplex operation.
– 802.3x Flow Control Support.
– Manageable Through Intelligent Chassis System.
– LLR (Enable/Disable), Fiber (Auto-Negotiation/Manual) Functions.
– Installable as Stand-Alone Device or in Rack-Mount Chassis.
Media Converter D-Link DMC-F60SC-E
– 100Base-TX to 100Base-FX Media Converter (Single mode 1310nm) – 60km.
– Fiber-optic speeds are critical to success, but twisted-pair cabling can only go so far. Using D-Link’s converters you can change a twisted-pair Fast Ethernet connection into a single-mode or multi-mode fiber connection that can go much farther. Converters for distances of anywhere from 2 km to 60 km allow you to optimize your selection.
Media converter D-Link DMC-1910T-E
– 1000Base-TX to 1000Base-LX Single Fiber Media converter (TX: 1550μm; RX: 1310μm, Single-mode, 15km).
– The D-Link DMC-1910T/E Fiber Media Converter converts 1000BASE-T copper Gigabit signals to 1000BASE-LX fiber Gigabit signals. This allows you to connect longer distance fiber cables between two devices that are designed only for shorter distance Cat. 5 twisted-pair cable.
100Base-TX to 100Base-FX (LC) Single-mode Media Converter D-Link DMC-F20SC-BXD/E
Media converters DMC-F20SC-BXD and DMC-F20SC-BXU perform conversion of interfaces ‘twisted pair – a single mode optical fiber cable according to one’ for the Ethernet 10/ 100BASE-TX and 100BASE-FX networks. Devices can simultaneously transmit and receive signals at wavelengths between 1310 nm and 1550 nm in a single optical fiber at a distance of 20 km.