Hộp đế Camera TD-YXH0303
Media converter D-Link DMC-1910R-A9A
-1000Base-TX to 1000Base-LX Single Fiber Media converter (Tx: 1310μm; Rx: 1550μm, Single-mode, 15km).
-The D-Link DMC-1910R Fiber Media Converter converts 1000BASE-T copper Gigabit signals to 1000BASE-LX fiber Gigabit signals.
-This allows you to connect longer distance fiber cables between two devices that are designed only for shorter distance Cat. 5 twisted pair cable.
-The DMC-1910R converts 10/100Mbps 10BASE-T-100BASE-TX Fast Ethernet twisted pair signals to 100BASE-FX single-mode signals up to 15 km apart.
-This media converter supports maximum 15 km fiber cable distance.
Media converter D-Link DMC-1910R-E
– 1000Base-TX to 1000Base-LX Single Fiber Media converter (TX: 1310μm; RX: 1550μm, Single-mode, 15km).
– Up to 15 km Single-Mode Fiber Cable Distance.
– Single Fiber Strand for Transmission/Reception.
– Full Duplex operation.
– 802.3x Flow Control Support.
– Manageable Through Intelligent Chassis System.
– LLR (Enable/Disable), Fiber (Auto-Negotiation/Manual) Functions.
– Installable as Stand-Alone Device or in Rack-Mount Chassis.
Media converter D-Link DMC-1910T-A9A
-1000Base-TX to 1000Base-LX Single Fiber Media converter (TX: 1550μm; RX: 1310μm, Single-mode, 15km).
-The DMC-1910T/A9A converts 10/100Mbps 10BASE-T-100BASE-TX Fast Ethernet twisted pair signals to 100BASE-FX single-mode signals up to 15 km apart.
-1 RJ-45 twisted-pair port and 1 fiber port (SC connector) are provided.
Media converter D-Link DMC-1910T-E
– 1000Base-TX to 1000Base-LX Single Fiber Media converter (TX: 1550μm; RX: 1310μm, Single-mode, 15km).
– The D-Link DMC-1910T/E Fiber Media Converter converts 1000BASE-T copper Gigabit signals to 1000BASE-LX fiber Gigabit signals. This allows you to connect longer distance fiber cables between two devices that are designed only for shorter distance Cat. 5 twisted-pair cable.
Media Converter D-Link DMC-300SC
DMC-300SC converts 10/100Mbps 10BASE-T/100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet multi-mode fiber signals. Maximum fiber cable distance is 2 km. 1 RJ-45 twisted-pair port and 1 fiber port are provided.
Media Converter D-Link DMC-300SC-E
-10/100Base-TX (UTP) to 100Base-FX (SC) Multi-mode 2km Fiber Media Converter (Usable in DMC-1000 Chassis).
-The DMC-300SC/E by D-Link® is a media converter designed to connect 10BASE-T/100BASE-TX copper to 100Base-FX fiber media and vice versa. Based on the IEEE 802.3 and 802.3u standards, the DMC-300SC/E is designed for use with multimode fiber cable utilising the SC-Type connector.
Media Converter D-Link DMC-515SC-E
– 10/100Base-TX (UTP) to 100Base-FX (SC) Single-mode 15km Fiber Media Converter (Usable in DMC-1000 Chassis).
– The DMC-515SC convert 10/100Mbps 10BASE-T/100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet single-mode fiber signals.
– 1 RJ-45 twisted-pair port and 1 fiber port (SC connector) are provided.
– Supporting maximum 15 km fiber cable distance.
Media Converter D-Link DMC-530SC-E
– 10/100Base-TX (UTP) to 100Base-FX (SC) Single-mode 30km Fiber Media Converter (Usable in DMC-1000 Chassis).
– The DMC-530SC convert 10/100Mbps 10BASE-T/100BASE-TX Fast Ethernet twisted-pair signals to 100BASE-FX Fast Ethernet single-mode fiber signals.
Media Converter D-Link DMC-700SC-E
The DMC-700SC by D-Link® is a media converter designed to connect 1000BASE-SX fiber to 1000Base-T copper media or vice versa. Based on the IEEE 802.3ab and 802.3z standards, the DMC-700SC is designed for use with multi-mode fiber cable utilising the SC-Type connector. The DMC-700SC supports shortwave (SX) laser specifications at a full wire-speed forwarding rate. Other features of this module include the ability to be used as a standalone device (no chassis required), Auto MDI/MDI-X for TX port, Auto negotiation of duplex mode on TX port, and front panel status LEDs. The DMC-700SC will transmit at extended fiber optic distances utilising multimode fiber up to 550 meters.
Media Converter D-Link DMC-810SC-E
– 1000Base-TX (UTP) to 1000Base-LX (SC) Single-mode 10km Fiber Media Converter (Usable in DMC-1000 Chassis).
– This Media Converter can be used by itself or installed in a chassis and converts between 1000BASE-T Gigabit twisted-pair signals to 1000BASE-LX Gigabit single-mode fiber signals.
– The DMC-810SC converts 1000BASE-T Gigabit twisted-pair signals to 1000BASE-LX Gigabit single-mode fiber signals. Maximum fiber cable distance is 10 km. 1 RJ-45 port and 1 fiber port (SC type connector) are provided.
Media converter D-Link DMC-920R
– A pair of one-channel single fiber is used for media conversion between 10/100BASE-TX and 100BASE-FX.
– Two different transmitting wavelengths, one wavelength with bi-directional for both transmit and receive.
– This media converter provides 1310 micron for TX, 1550 micron for RX.
– Fiber cable support is 9/125um, 10/125um single-mode fiber, maximum 20 km cable distance.
Media converter D-Link DMC-920T
– A pair of one-channel single fiber is used for media conversion between 10/100BASE-TX and 100BASE-FX.
– Two different transmitting wavelengths, one wavelength with bi-directional for both transmit and receive.
– This media converter provides 1550 micron for TX, 1310 micron for RX.
– Fiber cable support is 9/125um, 10/125um single-mode fiber, maximum 20 km cable distance.
Media Converter D-Link DMC-F30SC-E 100Base-TX to 100Base-FX (SC) Single-mode
– 100Base-TX to 100Base-FX (SC) Single-mode Media Converter (30km) (Stand-Alone).
– Fiber-optic speeds are critical to success, but twisted-pair cabling can only go so far. Using D-Link’s converters you can change a twisted-pair Fast Ethernet connection into a single-mode or multi-mode fiber connection that can go much farther.
Media Converter D-Link DMC-F60SC-E
– 100Base-TX to 100Base-FX Media Converter (Single mode 1310nm) – 60km.
– Fiber-optic speeds are critical to success, but twisted-pair cabling can only go so far. Using D-Link’s converters you can change a twisted-pair Fast Ethernet connection into a single-mode or multi-mode fiber connection that can go much farther. Converters for distances of anywhere from 2 km to 60 km allow you to optimize your selection.
Media Converter D-Link DMC-G01LC-E 10/100/1000Mbps to SFP
D-Link’s DMC-G01LC standalone media Converter turns a copper Ethernet link into a fiber link, allowing for an ultra-fast, long distance connection. Installation of a standalone media converter is simple, and allows you to tap into fiber speeds with ease. Instead of requiring an investment in an entire chassis, a standalone media converter provides the same high-quality conversion on a unit-by-unit basis. You can save space and cut costs while still extending your network over long distances of 10 km and beyond on a fiber optic line.
Hiển thị 321–336 của 369 kết quả